Mar 30, 2007 - This manual currently suits for SL2-141/SL2-141-I. Boot loader contains very simple web page to allow the users to update the run-time firmware image. Confirm that the Siemens ADSL Router USB Remote NDIS Device.

I just got bsnl dataone connection. I have taken the Home500 plan which gives me 2.5 GB limited usage including 2-8 night unlimited usage option. The bsnl provied me a Siemens modem (SL2_141) which has wi-fi and 4 ports for rj45. Now i am going to setup it on my Fedora 7 os as well as on win os too. I will follow the guide posted here in this forum settip up adsl on linux. Have u guys know anything about this siemens modem (SL2_141) like technical specifications etc.

I really need that. I did not find on siemens's website.after i setup the connection, i will post my feedback here.take carebye.

I have also a Allience Broadband conection. What i did instead of pug-in the alliance RJ45 directly to my LAN card i connect to the adsl modem. Then i connect the RJ45 from modem to my LAN card (other end is connected to the modem). Connection is going fine. But i cannot access the modem from 192.168.1.1. The login prompt shows 'Allied Telesyn AT-99241' and asking for ID and password. I use 'admin' as ID and password, but doesnot work.

I did not setup the modem yet using rp-pppoe.what should i do, plz advice. How do i access the modem?and how do i use two connection (dataone and alliance) at the same time from that modem/router. Alliance gave me ip 10.10.55.x. 1.Did you download the manual?2.

You can program different ISP's in the same modem. VCI VPI changes as well as Id and password. ( I have set both Airtel/Dataone in Beetel220Bxadsl2+modem )3. Both cannot be connected together to the computer. Appears the modem is set for alliance connection.5.

Alliance BB is it cable broadband? Try admin and password allied. ( or contact CC of Alliance ). Presume, You are working In Alliance Bb now.8. In computer start/run type cmd type ipconfig/allWhat is the default gateway?

Which mannual? From where i download? Bsnl provides me Siemens SL2_141 4. Yes, i didnot configure it, i just plugin alliance rj45 to modem and modem's rj45 to my lan card, and its working.

Yes, cable BB 6. Not working, whose ip is this, my modem's web page should come. Ifconfig -a shows eth0 and lo for eth0: inet addr:10.10.55.x Bcast:10.10.55.255 Mask:255.255.255.192 gateway = 10.10.55.193 1. Please see my posting at 2 in this thread. BSNL + ADSL siemensSL2_141 yet to be programmed.

4&5&7 Alliance Cable BB connected to which modem? If you are using Siemens supplied by BSNL please confirm. Because a cable modem data signal and Adsl data signal are different. Could be alliance default gateway.

10.10.55.193 web site reports location private LAN 8. Ipconfig for Alliance connection gateway. I have no knowledge of Fedora( linux OS) or any other OS other than Windows95/98/Me/Xppro sp2 Update: Go to Yahoo search and enter 'siemens sl2_141 ' without quotes. Third entry is w5.siemens.ch/eip/public/QsG/QsG_SL2-141-I_ENG.pdf 1378 KB When I click the link it goes to download mode. 4, you will learn how to configure your computer to communicate with the SIEMENS.